Description
Motor assistance above 25 km/h
The tuning module ensures that the motor support of your eBike is still active at speeds above 25 km/h.
Tuning can be activated and deactivated
You can use a clever on/off sequence for your eBike to optimize the tuning
- activate, deactivate or
- only once for the current ride. After switching off the eBike, the tuning is then gone.
The activated tuning and the selected speed display are signaled via the speedometer when the eBike is switched on. This means you always know which mode is active.
Real speed modified readable
To ensure that the motor assistance also works above 25 km/h, a lower speed than the actual speed is displayed when tuning is activated:
Below 22 km/h, the real speed is displayed.
Above 22 km/h, mentally move the decimal point displayed in the speedometer one place to the right. The leading 2 on the far left then no longer has any function.
Example: A speed of 38 km/h is displayed as: 23.8 km/h
Advantage: The verifiable average speed always remains inconspicuously below 25 km/h!
Maximum support speed adjustable
You can set the speed up to which the motor should provide assistance. This ranges from 31 to 50 km/h in steps of 1 km/h. The standard setting for this tuning module is 45 km/h.
Once the cut-off speed has been reached, the motor assistance is gently reduced.
The speed remains visible even above the set switch-off speed.
Correct display of kilometers driven
Due to the low speed displayed when tuning is activated, the mileage in the speedometer is initially lower than the actual mileage. This is compensated for by the tuning module at the end of the journey. The speedometer then displays the exact distance traveled.
This reduces the typical "side effects" of many tuning solutions, which otherwise leave incorrect values permanently in the overall system.
Supported motors
- PW-X3
- PW-S2
- PW-XM
- GIANT SyncDrive Pro 2
- GIANT SyncDrive Sport 2
Supported displays: all Yamaha and Giant displays
Display with Yamaha Display-A (Side Switch) is less accurate as the decimal place is missing.
Here is an alternative display option from Sigma Sport:
https://sigmasport.com/de/e-bike-compatibility-yamaha/
Motors not supported:
For the following motors....
Yamaha PW, PW-X, PW-SE, PW-TE, PW-ST and PW-X2
GIANT SyncDrive Sport / Life / Pro
..... please select this tuning module:
E-Bike Tuning for Yamaha and Giant motors V3
Installation
Installation takes just a few minutes and can also be completely reversed. The tuning module is inserted between the speed sensor and the motor of your pedelec. It is not visible from the outside. No complex programming required. Simply plug it in and ride off.
More information
A detailed description of the range of functions and installation instructions can be found in the manual.
We have answered the most frequent customer queries in our Frequently Asked Questions.
Please also note the legal information on tuning!
Scope of delivery
- Tuning module with original plugs
- Operating instructions (German, English, Italian)
- Installation instructions
- Cable ties and stickers
