Settings
Switch on the EBike. The following settings can then be made:
Desired setting | Action | Afterwards |
---|---|---|
Activate tuning once | Method 1: 2 magnetic pulses | Wait 5 seconds |
Method 2: Switch off within 10 seconds switch off | Switch on | |
Activate / deactivate tuning | 3 Magnetic pulses | Switching off and on |
Select speed display | 4 Magnetic pulses | Switching off and on |
Switch to calibration mode | 5 Magnetic pulses | Switching off and on |
Speed display
Selected speed display | Signalization for 5 sec. after switching on |
---|---|
Tuning from | 0 km/h |
Immediate halving from 0 km/h | 5 km/h |
Mentally move the comma one place to the left | 10 km/h |
Half speed from 20 km/h | 20 km/h |
Calibration mode
In calibration mode | Action | As soon as 20 km/h is displayed |
---|---|---|
Reduce speed | 1 magnetic pulse (*) | Switch off the eBike, to exit calibration mode |
Increase speed | 2 magnetic pulses (*) |
(*) Wait approx. 1 second after the pulse sequence until the speed has adjusted